Sign board installation on the wall you actually have
Signage installation fails when the board is built for a wall nobody measured. Ideal Signs asks for the clear height, the clear width and the unit, plus a design photo and a site photo, before we confirm a fitting day. The site photo should show the shutter, the fascia or the glass, and anything in the way: an AC drain, a conduit, a rolling shutter box. We manufacture in Navi Mumbai and install in Mumbai, Navi Mumbai and Thane.
Sign board installation on a sound wall is a one-day job for most shop fascias once the board is ready. Manufacturing of a new board is commonly 3 to 7 working days after the design and the advance are agreed. Busy weeks run longer, and we say so before you confirm. Where we specify the materials on a new sign, the sign is supplied with a 5-year guarantee from installation.
Signage fitting and signage mounting
Signage fitting is how the board meets the building. We mark the level, check that the plugs have something solid behind them, and do not hang a lit board on a hollow band. Signage mounting for letters is the stud pattern and the spacer, so the letter sits even and the wire, if there is one, has a path back to the supply. A name board fitting on a shutter is measured across the clear shutter, not from column to column, or the board will foul the rolling shutter.
Shop board installation and building signage installation
Shop board installation is the job most chemists, clinics and clothing shops book: a name on the shutter or just above the entrance, readable from the pavement. Building signage installation is the society name, the office floor plate or the reception wall, often in more than one piece. Both need the same three numbers, height, width and unit, and a photo that shows how we will stand. If the only access is a busy footpath, tell us the hour the shop can close a bay.
LED board installation and the power point
LED board installation includes the run from the board to a power point the electrician can isolate. We do not leave a lit sign on a loose wire. After the board is up we switch it on and look at it from the road, in daylight, before we leave. If an older board was fixed badly and has to be set right, this is the page to use. A board that has failed needs signage repairing. A board you want checked every season needs signage servicing or a signage AMC. See the sign board manufacturer, LED sign board, acrylic letters and ACP cladding pages for the products we fit.